Hydraulic Welded Bottle Jack 50T(110,231lbs) Capacity for Auto Repair and House Lift, Red
- 【POWERFUL LIFTING FORCE】The smooth surface of the piston rod is beautiful, ante-corrosion, and also has strong pressure resistance, with a strong lifting force of 50T/110,231 lbs.
- 【SUFFICIENT LIFTIING HEIGHT】In addition to the height of the jack body (10.23in), the piston rod (5.9in) and screw rod (2.36in) can be raised to increase the stroke, so that the jack can be lifted higher (up to 18.5in) to a wider range of uses.
- 【HIGH/LOW-TEMPERATURE RESISTANCE】The hydraulic system uses high-quality lubricants for better corrosion resistance and high/low-temperature flexibility allowing it to operate at temperatures between -4°F and 113°F.
- 【COMPACT AND PORTABLE】Its compact size is suitable for narrow and low working spaces, and can be easily carried in the trunk of a vehicle. In addition, the bottle jack has a handle that makes it easy to move and carry to any location.
- 【HIGH SAFETY】The bottle jack is equipped with a safety valve that can automatically protect the hydraulic system in case of overload to prevent damage to the jack. At the same time, the height-limiting device prevents over-pumping and gives you safety assurance. The bottle jack uses a rubber oil plug with a seal inside, which ensures a good seal against oil leakage.
Quantity
-
Detail
Specifications
Material: Alloy Steel
Color: Red
Process: Baking Paint
Operation Temperature: -20~45°C/-4~113°F
Body Height: 26cm/10.23in
Lifting Height: 15cm /5.9in
Adjustment Height: 6cm /2.36in
Maximum Lifting Height: 47cm /18.5in
Housing Diameter: 14cm/5.51in
Base Size: 18.4*16cm/7.24*6.29in
Product Height: 26cm/10.23in
Gross Weight: 20kg/44.44lbs
Net Weight: 17kg/37.47lbs
Loading Capacity: 50T/110,231 lbs
Packing Size: 20*17*28cm/7.87*6.69*11.02in
Package Included
1* Hydraulic Cylinder Jack
3* Levers
1* English Manual
Notes
1. Please read the operating manual completely before use. And pay particular attention to the safety instructions included.
2. This is a hydraulic jack and cannot be used for jacking or fixing for a long time.
3. It is prohibited to screw out the oil valve, otherwise the use of the product will be affected.
4. Overload operation is strictly prohibited. Please use above the hard support surface. Please do not lift the jack to the top when there is no load. If the jack cannot be lifted, please check whether the oil valve is tightened.
5. Park the vehicle on a level and hard ground before using the jack, and open the danger warning sign behind you. When the jack supports the vehicle, it is strictly forbidden to enter the vehicle bottom!
6. Observe the car chassis and put the jack inside the side frame.
7. To ensure the normal use of the jack, please keep the jack piston rod clean and lubricated.
8. When the jack is not in use, the oil drain valve should be closed first and the jack should be placed vertically, otherwise oil leakage will occur!
-
Customer ReviewsNo comments