RESIONE Tough 3D Printer Resin, Not Brittle ABS Like Tough & Rigid 3D Resin for LCD 3D Printing UV 405nm (M58 Grey 1KG)
- Sturdy like ABS: The mechanical properties of the M58 resin printed parts are similar to tough thermoplastic materials, with high tensile strength and excellent impact strength, and can drill holes and nails in fragile locations
- Wear-resistant and Scratch-resistant: The surface of the M58 resin print is very hard, the assembly position will not drop powder after friction, which is suitable for printing movable joints, gears, or bearing parts
- Clear and Sharp Details: M58 3d resin has high molding accuracy, is not easy to overexpose, and can accurately restore the fine details in 3d files
- Mixed with F69/F39/F39T: Tough resin K/M58/M68/G217 can be mixed with F69/F39/F39T resin, which can make the printed parts tougher, more durable, and not brittle for a long time
- Wide Adaptability: Designed for 385~405nm UV LED light source, it is suitable for mainstream LCD/MSLA/DLP resin 3D printers on the market
Quantity
-
Detail
RESIONE M58 gray 3d printer resin is especially suitable for the production of sturdy functional parts or those movable parts that need to be assembled,the mechanical properties of the printed parts are similar to tough thermoplastics,can drill holes and nails in fragile locations. This 3d resin has high molding accuracy, wear-resistant and delicate surface, and will not lose the fine details in the 3D file. It is also a good choice to print a miniatures. The wavelength range is 385-405nm, suitable for mainstream LCD/MSLA/DLP 3d printers on the market.
M58 Tough 3D Printer Resin
Printing Settings
- Layer Height(mm):0.05mm
- Bottom exposure time: 30-45s
- Normal exposure time: 1.4-11s
If you need specific settings, please visit the RESIONE official website
Cleaning and Post-curing
- Cleaning tools: Soft brush or Ultrasonic cleaner or 2 in 1Wash Cure Machine
- Cleaning time: 2min
- Cleaning solvent: 95% Ethanol or IPA
- Post-curing light source: 385-405nm UV(40W)
- Post-curing time: 2min
Difference between M58, M68 and K
- Color:M58 is light gray, M68 is white, K is black
- Toughness: K ≥ M68＞M58；
- Rigidity: K ≤ M68＜M58
Resin Parameters
- Shore Hardness: 87D
- Tensile Strength: 52.3MPa
- Flexural Strength: 68.2MPa
- Elongation at Break: 12.30%
- Viscosity（25℃）: 307mpa.s
- Notched IZOD: 51.4J/m
- HDT(0.455MPa): 65℃
Sturdy like ABS
The mechanical properties of the printed parts are similar to tough thermoplastic materials, can drill holes and nails in fragile locations.
Wear-resistant and scratch-resistant
The surface of prints is smooth and hard, the assembly position will not drop powder after friction.
Clear and sharp details
M58 3d resin has high molding accuracy, is not easy to overexpose, and can accurately restore the fine details in 3d files.
Precautions
USE：
1. Operating temperature : 20~35℃,68℉~95℉
2. Shake well before each use. If the resin is very viscous, preheat the bottle with 60℃ warm water before shaking it.
3. Please wear nitrile rubber gloves during operation and keep the operating environment well ventilated.
4. Do not use resin near windows, balconies or other strong ultraviolet environment.
5. If you accidentally get resin into your eyes, mouth or nose, rinse immediately with plenty of water and consult a doctor.
6. The resin remaining on the skin can be washed with soap, hand sanitizer, etc.
7. Caution for people allergic to acrylics.
Waste liquid：
1. If the resin is no longer needed, please pour it into a transparent container (pour a small amount at a time), then place it in the sun to completely cure it.
2. If it is a cleaning fluid containing resin, please do not discharge it directly into the sewer. You can put the cleaning solution in the sun first, wait until the resin inside is completely solidified and precipitated, and then filter out the solid residue, and the filtered cleaning solution can be used continuously.
-
Customer ReviewsNo comments