Home / Shop / SuperHDT 3D Printer Resin, Highest Heat Deflection Temperature 464°F, Made in Korea by 3DMaterials (1000g, Amber)

SuperHDT 3D Printer Resin, Highest Heat Deflection Temperature 464°F, Made in Korea by 3DMaterials (1000g, Amber)

[Heat Deflection Temperature 464 °F] Highest heat deflection temperature of 464 °F in the world.
[Increase HDT by adding SuperHDT] Adding SuperHDT to standard resins increase the HDT of print substantially.
[User Guide #1 Remelting Resin] Please check the color before use, warm the bottle at 140°F for an hour or 120°F for couple of hours.
[User Guide #2 Post-curing] Post-curing by 20mW/cm2 395nm ~ 405nm LED light for 10 minutes, and heating up the print in 176°F oven for one hour.
[ISO 10993-5] Properly cleaned and fully post cured SuperHDT prints pass ISO 10993-5 test.

Quantity

ADD TO CART

BUY IT NOW

Detail
2.2 lb / 1.1 lb

SuperHDT 464°F (240°C)

[Heat Deflection Temperature 464 °F] Highest heat deflection temperature of 464 °F in the world

[Increase HDT by adding SuperHDT] Adding SuperHDT to standard resins increase the HDT of print substantially

[User Guide #1 Remelting Resin] Please check the color before use, warm the bottle at 140°F for an hour or 120°F for couple of hours

[ISO 10993-5] Properly cleaned and fully post cured SuperHDT prints pass ISO 10993-5 test

11.0 lb / 2.2 lb / 1.1 lb

SuperHDT V-0

[Non-Flammability] Pass UL94 V-0 non-flammability requirements and FST (AITM2-0002, AITM2-0007, AITM3-0005)

[Heat Deflection Temperature 464 °F] Highest heat deflection temperature of 464 °F in the world

[User Guide #1 Remelting Resin] Please check the color before use, warm the bottle at 140°F for an hour or 120°F for couple of hours

[User Guide #2 Post-curing] Post-curing by 20mW/cm2 395nm ~ 405nm LED light for 10 minutes, and heating up the print in 176°F oven for one hour

2.2 lb / 1.1 lb

SuperRigid 6.0 GPa

[40% of Nano-Micro Ceramic Powder Filled] 40% of nano-micron ceramic powder filled for strong industrial grade ceramic like prototype

[High Modulus Ceramic-Like] 6.0GPa tensile and 8.0GPa flexural modules simulating stiffness of ceramic

[Ceramic Like Texture] High density and surface texture simulating ceramic, stone, cement

[ISO 10993-5] Properly cleaned and fully post cured SuperRigid prints pass ISO 10993-5 test
8.0 GPa SUPER RIGID & 464°F HDT PARTS PRINTING, PREP, POST-CURING, TEST GUIDE

HEAT DEFLECTION TEST OF SUPERHDT 3D PRINTED PARTS

Highest Heat Deflection Temperature of 464°F (240°C) for 3D-printed SuperHDT

SuperHDTprovides a high heat deflection temperature of 464°F (240°C), perfect for heat-resistant 3D-printed parts. Durable and stable, it's ideal for prototypes and industrial components needing thermal resistance.

The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.

NON-FLAMMABILITY TEST FOR UL94 V-0 RATING

SuperHDT V-0 3D-Printed Parts Pass UL94 V-0 Non-Flammability Requirements.

Halogen-free, flame-retardant oligomer synthesized by 3DMaterials allows SuperPP V-0 to pass UL94 V-0 flammability requirements and FST. SuperHDT V-0 has the highest heat deflection temperature of 464°F (240°C), making it well-suited for electrical and lighting fixture parts with non-flammability.

The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.

PREPARATION AND POST-PROCESSING OF SuperHDT

From prep to post-processing to achieve maximum Heat Deflection Temperature

From preparation to post-processing, SuperHDTensures optimal heat deflection. Begin by remelting the resin if crystallized, wash and sand prints thoroughly, and remove supports. For maximum durability, apply over-coating and post-cure under LED light for 10 minutes.

The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.

1' 3D PRINTED LATTICE WITHSTAND 1,300 lbs WEIGHT

SuperRigid's 8.0 GPa flexural modulus withstands 1,300 lbs compression weight.

SuperRigidresin offers outstanding mechanical strength with an 8.0 GPaflexural modulus, capable of withstanding up to 1,300 lbs of compression weight. Ideal for industrial prototypes and load-bearing parts, it delivers exceptional durability, ensuring structural integrity under high stress.

The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.

ONE-INCH 3D-PRINTED LATTICE SUPPORT FOR MERCEDES S

SuperRigid's 8.0 GPa flexural modulus supports S-Class, weighing over 2,500 kg.

The ONE INCH 3D PRINTED LATTICE SUPPORT for the MERCEDES S-CLASS utilizes SuperRigid's 8.0 GPa flexural modulus to support over 2,500 kg, enhancing structural integrity and performance in automotive applications.

The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.
Where can I find the recommended printing settings for SuperHDT?

The settings chart is available at the end of this page, or you can download it from the Amazon document list using QR code on the label of bottle.

How can I remove the surface tackiness even after post-curing?

Use alcohol to remove excess resin from the surface and dry the prints completely. Post-cure them using any brand’s curing machine for 20 minutes in air. One tip is the underwater (without oxygen) curing for another 10 minutes gives better result.
Customer Reviews

No comments

SEE ALL