PZ-G62P Built-in Amplifier Photoelectric Sensors PNP

Photoelectric Sensors
Product Description
Built-in amplifier photoelectric sensors PZ-G62P PNP
Detailed Images
SPECIFICATIONS
Model
PZ-G62P
Type
Retro-reflective *1
Transparent
object detection
Shape
Rectangular
Output
NPN
Cable connection
Cable (2 m 78.74") *2
Detecting distance
0.1 to 1 m
0.3' to 3.3'
(When R-2L
reflector
is used)
Spot diameter
Light
Infrared LED
Sensitivity adjustment
1-turn trimmer (230°)
Response time
500 µs
Operation mode
LIGHT-ON/DARK-ON (switch-selectable)
Indicators (LED)
Output: Orange LED,
Stable operation: Green LED
Control output
Open collector output, 30 V max., 100 mA max., Residual voltage: 1 V max.
Protection circuit
Reversed polarity, overcurrent protection, surge absorber
Interference suppression
Up to 2 units
(with the automatic different frequency function)
Tightening
Rectangular models (Mounting hole part): 0.5 N m max.
Rating
Power voltage
10 to 30 VDC, including Ripple (P-P) 10 %
Current consumption
34 mA or less
Environmental resistance
Enclosure rating
IEC: IP67/NEMA: 4A, 6, 12/DIN: IP69K
Ambient light
Incandescent lamp: 5,000 lux max., Sunlight: 20,000 lux max.
Ambient temperature
-20 to +55 °C -4 to 131 °F (No freezing)
Relative humidity
35 to 85 % RH (No condensation)
Vibration resistance
10 to 55 Hz, Double amplitude 1.5 mm 0.06", 2 hours in each of the X, Y, and Z directions
Shock resistance
1,000 m/s2, 6 times in each of the X, Y, and Z directions
Material
Housing, M18 nut
(threaded models only)
Glass-fiber reinforced PBT
Lens cover
Polyarylate (PAR)
Trimmer
Glass-fiber reinforced polyamide (PA)
Case connection
Screw: Nickel-plated iron and zinc, packing: nitrile butadiene rubber (NBR)
Cable (cable models only)